110 VAC - 24 VDC - 2-Sync Hall Effect Control Box with Presets

The FLTCON-2 synchronous hall effect control box is designed to function with two 24VDC hall effect linear actuators. Our PA-03, PA-04, and PA-18 linear actuators can be customized to have a hall effect feedback sensor as well as a 24VDC motor. Our PA-04-HS units are readily available in 24VDC and come standard with the hall effect sensor required for the FLTCON series control boxes.

Using the wired remote with presets, the user can extend, stop, and retract the linear actuators in sync, as well as program up to 4 preset positions. Connect the hall effect linear actuators to the FLTCON-2 using the provided 6-pin Molex connector. Connect the wired remote, then plug the control box into 120VAC. The system is now ready to use. Please note that the control box will not protect against large current surges caused by hard stops/ damaged units. It can also work as a replacement control box for our FLT-02, FLT-03-2-2, FLT-06, FLT-07 and FLT-10 table lifts. 

The FLTCON series does not include a wired remote, please see our hand remotes section to choose the most suitable remote for the application.